Posted by Marc O'Hara on August 09, 1998 at 21:22:36:
In Reply to: G40V outputs?! posted by Nick on August 07, 1998 at 01:05:01:
The speaker outputs are located on the back of the amplifier.
The internal speaker is plugged into the 8Ohm output with a plug similar to a guitar cable plug. To use an external speaker you must disconnect the internal one.
You could probably use a Y cable if you wanted to use the internal speaker in conjunction with an external speaker, but be aware of your ohm rating. Two 8ohm speakers wired in parallel will yeild an ohm rating of 4ohms. Two 8ohm speakers wired in series will yeild 16ohms.
Ask a local tech at a music store about your intended setup.
Hey, the G40V is a good little amp with plenty of power for your harp.